Produkte
Seite 1 von 2
-
111
Single Liner Hand-Cut Stencil
Hand-cut, high quality, durable stencil coated with an advanced medium tack, rubber-based pressure-sensitive adhesive protected by an easy-release-treated HDPE liner. Designed for superior shape carving in marble and granite. Unique rubber formula allows easy cutting with less frequent knife sharpening. Controlled shrinkage gives accurate panel replacement after frosting. Recommended for...
Produkt anzeigen -
116
Single Liner Media Blast Stencil - Machine Cut
Machine-cut, high quality, durable stencil coated with an advanced, high tack, water based acrylic pressure-sensitive adhesive protected by a clear polyester liner. Designed for slot-hole pattern Gerber® 15” and 30” plotters. The 15” widths will also track accurately in IBM® pattern and friction-fed cutters.
Produkt anzeigen -
117
Single Liner Media Blast Stencil – Computer Cut
Computer cut, high quality, durable stencil coated with an advanced, medium tack, rubber-based pressure-sensitive adhesive protected by a clear polyester liner. Designed for precision cutting in slot-hole pattern Gerber® 15” and 30” plotters. The 15” widths will also track accurately in IBM® pattern and friction-fed cutters.
Produkt anzeigen -
125
Single Liner Hand-Cut Media Blast Stencil
Hand-cut, high quality, durable stencil coated with an advanced, high tack, water-based, pressure-sensitive, acrylic adhesive protected by an easy-release blue liner. #125 is designed and recommended for raw/unfinished wood, HDU foam-board, brick and rough stone. Not intended for use on marble, granite, or polished surfaces.
Produkt anzeigen -
1258
Single Liner Hand-Cut Media Blast Stencil
Hand-cut, high quality, durable stencil coated with an advanced, high tack, water-based, pressure-sensitive, acrylic adhesive protected by an easy release, 2mil clear PET liner.
Produkt anzeigen -
153
Single Liner Holeless Stencil for Friction-Fed Cutters
High quality, durable, stencil coated with an advanced medium tack, rubber-based, pressure-sensitive adhesive protected by a clear polyester liner. Un-punched for friction fed cutters and is designed for use on primed/painted wood and HDU foam-board.
Produkt anzeigen -
155
Single Liner Stencil for Friction-Fed Cutters
High quality, durable stencil coated with an advanced water-based, high tack acrylic adhesive protected by a clear polyester liner. Un-punched for friction-feed cutters and is designed for use on primed / painted wood and HDU foam-board.
Produkt anzeigen -
156
Single Liner High Tack Media Blast Stencil - Machine Cut
High quality, durable stencil coated with an advanced, high tack, water-based, pressure sensitive acrylic adhesive protected by a clear polyester liner. Contains a slot-hole pattern. Rubber is trimmed back ½” along each edge for IBM® cutters. #156 is designed and recommended for raw / unfinished wood, HDU foam-board, brick, and...
Produkt anzeigen -
157
Single Liner Media Blast Stencil - Machine Cut
High quality, durable stencil coated with an advanced, medium tack, rubber-based pressure-sensitive adhesive protected by a clear PET liner. Half inch on center hole pattern designed for IBM® sprockets. Tractor-feed holes are punched through liner and rubber. The specially treated polyester liner retains cut designs during transfer from plotter to...
Produkt anzeigen -
211 FILLER
Stencil Filler
211 stencil filler is specially formulated to work with most stencil products’ adhesive and create a better bond to the substrate during sandblasting. This extra bond helps small, intricate designs to stay attached to the substrate and not lift when sandblasting pressure is applied. 211 filler is a formulated high...
Produkt anzeigen -
223 FILLER
Stencil Filler
223 stencil filler is specially formulated to work with the most stencil products’ adhesive and create a better bond to the substrate during sandblasting. This extra bond helps small, intricate designs to stay attached to the substrate and not lift when sandblasting pressure is applied. 223 filler is a formulated...
Produkt anzeigen -
333 Stencil Filler
Water-Based Stencil Filler
333 stencil filler is specially formulated to work with all IPG ‘Anchor’ stencil products’ adhesive to create a better bond to the substrate during sandblasting. This extra bond helps small, intricate designs to stay attached to the substrate to prevent lifting when sandblasting pressure is applied.
Produkt anzeigen