155Single Liner Stencil for Friction-Fed Cutters
Verwandte Produkte
-
153
Single Liner Holeless Stencil for Friction-Fed Cutters
High quality, durable, stencil coated with an advanced medium tack, rubber-based, pressure-sensitive adhesive protected by a clear polyester liner. Un-punched for friction fed cutters and is designed for use on primed/painted wood and HDU foam-board.
Produkt anzeigen -
BT100
PMB Blast Impact Tape
Durable rubber product with an aggressive, acrylic, pressure-sensitive adhesive provides instant adhesion to clean/dry surfaces with little to no hot glue required on edges to prevent media intrusion. Remains flexible and resists cracking and lifting. Conforms to irregular/curved surfaces. Clean removal after blasting. White crepe release-coated paper liner can be...
Produkt anzeigen -
157
Single Liner Media Blast Stencil - Machine Cut
High quality, durable stencil coated with an advanced, medium tack, rubber-based pressure-sensitive adhesive protected by a clear PET liner. Half inch on center hole pattern designed for IBM® sprockets. Tractor-feed holes are punched through liner and rubber. The specially treated polyester liner retains cut designs during transfer from plotter to...
Produkt anzeigen -
156
Single Liner High Tack Media Blast Stencil - Machine Cut
High quality, durable stencil coated with an advanced, high tack, water-based, pressure sensitive acrylic adhesive protected by a clear polyester liner. Contains a slot-hole pattern. Rubber is trimmed back ½” along each edge for IBM® cutters. #156 is designed and recommended for raw / unfinished wood, HDU foam-board, brick, and...
Produkt anzeigen