The Need for Clean Removal
IPG understands the potential for unnecessary frustration and cost from blurred paint lines, messy adhesive residue, difficulty during removal, or worse yet, tape that falls off and is otherwise difficult to use. These issues can result in longer processing times and increased cost. IPG has developed a full line of clean removal products that are compatible with the latest coatings and cure temperatures so you can optimize performance and minimize cost.
Filtern nach
Produkte
Seite 1 von 3
-
515
A beige, semi-bleached crepe paper coated with a pressure-sensitive natural / synthetic rubber adhesive. Conformable and flexible. ASTM D6123 / 6123M, Type I C.I.D. A-A-883B, Type I
Produkt anzeigen -
6120
Polyester (PET) film backing with a silicone adhesive. Designed to perform in difficult masking operations such as the masking of surfaces during application of durable powder coatings. PET backing provides flexibility/conformability, solvent resistance, and chemical resistance. Removes without leaving residue on surfaces. Precision cut for tear resistance and clean, crisp...
Produkt anzeigen -
6215
Polyester (PET) film backing with a silicone adhesive. Designed to perform in difficult masking operations such a various phases of printed circuit board (PCB) production or masking of surfaces during application of durable powder coatings. PET backing provides flexibility/conformability, solvent resistance, and chemical resistance. Removes without leaving residue on surfaces....
Produkt anzeigen -
AM
AM (AquaMask) is an aqua colored, conformable, saturated, crepe paper masking tape with pressure-sensitive rubber adhesive. Good adhesion and holding properties. Clean, easy removal. Resists paint flaking and wet sanding. Compatible with both water and solvent-based paints. UV-resistant up to three (3) days. Temperature resistant up to 225°F (107°C) for...
Produkt anzeigen -
BD23
A medium strength, smooth crepe paper, pressure-sensitive tape having excellent tear strength and conformability to irregular surfaces. BD23's stain free adhesive is formulated to provide resistance to elevated temperatures (up to 300°F). Time of exposure and temperatures will vary depending on surfaces and application conditions.
Produkt anzeigen -
FM71
FM71 “fine line” masking tape uses thermally stabilized PVC backing with a rubber-based, pressure-sensitive adhesive. This tape is designed to offer a high degree of conformability without excessive stretch. Will hold and cleanly remove from surfaces in the presence of 250° F (120° C) temperatures for at least 30 minutes....
Produkt anzeigen -
GT
A green crepe paper masking tape coated with a stain resistant pressure-sensitive adhesive. Capable of withstanding oven temperatures up to 225°F (107°C) for one hour. Compatible with both water and solvent-based paints.
Produkt anzeigen -
HMF
Hand Masking Film is a pre-folded high density polyethylene masking film. The thick and durable 12 micron film is treated to resist overspray flaking during paint applications.
Produkt anzeigen -
OM
OM (Orange Mask®) is an orange, high quality, smooth, crepe paper masking tape with a natural rubber adhesive. Good quick-stick and holding properties for the composites industries. Smooth-to-the-touch, straight, clean paint-break line, highly conformable and flexible, tear resistant, moisture and solvent resistant, UV resistant up to 72 hours, and can...
Produkt anzeigen -
PE7
Durable, moisture resistant PE (polyethylene) film backing with a synthetic rubber-based pressure-sensitive adhesive. Bonds well to a variety of surfaces. This tape is designed to offer a high degree of conformability without excessive stretch. Stiffer backing makes it easier to handle in certain applications.
Produkt anzeigen -
PE8
PE8 has a durable, moisture resistant PE (polyethylene) backing with a rubber-based pressure-sensitive adhesive. Bonds well to a variety of surfaces. Clean removal from a variety of gel-coated surfaces. Designed to offer a high degree of conformability without excessive stretch. Stiffer backing makes it easier to handle in certain applications....
Produkt anzeigen -
PE9
Durable, moisture resistant PE (polyethylene) film backing with a synthetic rubber-based pressure-sensitive adhesive designed to offer high conformability without excessive stretch. Bonds well to a variety of surfaces.
Produkt anzeigen